PE Series Axial Piston Pump
ULTIMATE POWER AND PERFORMANCE IN A SMALL PACKAGE
The PE Series Axial Piston Pumps are ideal for heavy and demanding applications where long operations at high pressure is required. Piston pumps can mount directly to the power take-off with a standard European DIN 5462 or an ISO 14/UNI 8965 shaft. Complimentary mounts are available on most Muncie Power PTO series.
- Bi-rotational piston pump
- 14 standard sizes 4.23–26.42 GPM (16–100 LPM) @ 1,000 RPM
- Offered in single and dual output flow in select displacements
- Small, lightweight design
- Speeds up to 1,800 RPM
- BSPP straight thread
- DIN5462 4-bolt shaft and flange on all models
- Full one-year warranty
- Complimentary mounts are available on most Muncie Power
series power take-offs
| MODEL NO. | DISPLACEMENT CU.IN. (CC.) |
MIN. RPM | MAX. RPM CONTINUOUS |
MAX. PSI (BAR) CONTINUOUS |
MAX. INLET VACUUM |
INLET | OUTLET |
| 22PEV014 | 0.98 (16) | 400 | 1,800 | 4,785 (330) | 6 in.Hg. (.20 BAR) | 1 | 1 |
| 22PEV019 | 1.3 (21.3) | 400 | 1,800 | 4,785 (330) | 6 in.Hg. (.20 BAR) | 1 | 1 |
| 22PEV025 | 1.63 (26.7) | 350 | 1,800 | 4,785 (330) | 6 in.Hg. (.20 BAR) | 1 | 1 |
| 22PEV030 | 1.96 (32) | 350 | 1,800 | 4,785 (330) | 6 in.Hg. (.20 BAR) | 1 | 1 |
| 22PEH040 | 2.44 (40) | 400 | 1,800 | 5,800 (400) | 6 in.Hg. (.20 BAR) | 1¼ | 1 |
| 22PEH050 | 3.05 (50) | 400 | 1,800 | 4,785 (330) | 6 in.Hg. (.20 BAR) | 1¼ | 1 |
| 22PEH060 | 3.66 (60) | 300 | 1,700 | 4,200 (290) | 6 in.Hg. (.20 BAR) | 1¼ | 1 |
| 22PEV070 | 4.27 (70) | 400 | 1,600 | 4,350 (300) | 6 in.Hg. (.20 BAR) | 1½ | 1 |
| 22PEV080 | 4.88 (80) | 400 | 1,600 | 4,350 (300) | 6 in.Hg. (.20 BAR) | 1½ | 1 |
| 22PEV090 | 5.49 (90) | 400 | 1,600 | 4,350 (300) | 6 in.Hg. (.20 BAR) | 1½ | 1 |
| 22PEV100 | 6.1 (100) | 400 | 1,600 | 4,350 (300) | 6 in.Hg. (.20 BAR) | 1½ | 1 |
| 23PE4141 | 2.5 (41) + 2.5 (41) | 400 | 1,600 | 4,350 (300) | 6 in.Hg. (.20 BAR) | 1½ | 1 |
| 23PE5141 | 3.1 (51) + 2.5 (41) | 400 | 1,600 | 4,350 (300) | 6 in.Hg. (.20 BAR) | 1½ | 1 |
| 23PEV5151 | 3.1 (51) + 3.1 (51) | 400 | 1,600 | 4,350 (300) | 6 in.Hg. (.20 BAR) | 1½ | 1 |
Maximum Oil Temperature: 180° F (82° C)
Filter: 10 Micron return line filtration recommended
Approximate Weights: 22.22–38.94 lbs. (10.1–17.7 Kg.)
Recommended Oil Viscosity: 78–220 SUS (15–46 cSt), 5,000 SUS (1,000 cSt) max. start-up
The Muncie PE Series Inline Piston Pump is warranted against any defect in material and workmanship which existed at the time of sale by Muncie, according to the following provisions, subject to the requirements that the pump must be used only in accordance with catalogue and package instructions. The pump is warranted for a period of one year from date of installation. If during the warranty period the pump fails to operate to Muncie’s specifications due to a defect in any part in material or workmanship that existed at the time of sale by Muncie, the defective part will be repaired or replaced, at Muncie’s election, at no charge, if the defective part is returned to Muncie with transportation prepaid.
Warning. The above warranty shall terminate if any alterations or repairs are made to the pump other than at a Service Center owned by Muncie, or if the pump is used upon any equipment other than the equipment upon which it is first installed.
THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER OBLIGATIONS AND LIABILITIES, INCLUDING NEGLIGENCE AND ALL WARRANTIES OF MERCHANTABILITY AND SUITABILITY, EXPRESSED OR IMPLIED AND STATE MUNCIE’S ENTIRE AND EXCLUSIVE LIABILITY AND BUYER’S EXCLUSIVE REMEDY FOR ANY CLAIM OF DAMAGES IN CONNECTION WITH THE SALE, REPAIR OR REPLACEMENT OF THE ABOVE GOODS, THEIR DESIGN, INSTALLATION OR OPERATION. MUNCIE WILL IN NO EVENT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER, AND OUR LIABILITY UNDER NO CIRCUMSTANCES WILL EXCEED THE CONTRACT PRICE FOR THE GOODS FOR WHICH LIABILITY IS CLAIMED.
| MODEL NUMBER CONSTRUCTION |
 |
 |
