PTO BUILD COMPLETE
START A NEW SEARCH

CS10/CS11 Series Power Take-Off

Model Number

CS10A1007H3PX

Build ID

Use this unique build ID when referencing your order

23689750161454

List Price

$4565.44

Build Breakdown

Manufacturer: ALLISON

Model: 4000 Series (EVS, RDS, SPS, OFS) (MHS, BUS, TRV Optional)


Bolt Type: ALLISON 10-BOLT OPENING

Rotation: CRNK

PTO %: 139%

Torque: 450 lbs.ft.

HP: 86 HP

PTO Series: CS10, CS11 Series

Transmission Gear: A10

Gear Ratio: 07

Shift Type: H - Electric/Hydraulic, 12V

Assembly Arrangement: 3

Output Type: P - SAE "BB" 2 or 4 Bolt, 1" 15 Spline

Special Feature: X - None

FIND A DISTRIBUTOR PAIR WITH A PUMP
EMAIL RESULTS
POWER TAKE OFF
  • CS10A1007H3PX
    PTO Part Number
    $4565.44
  • TOTAL
    $4565.44
FOOTNOTES
MODEL FOOTNOTES
ADAPTER FOOTNOTES
PTO FOOTNOTES
PTO available with Muncie Start®; SX shift code (A20).
10
Standard output option "C" (1410 companion flange) shown. Light duty applications can use the "B" option which will reduce available PTO output torque to 210 lb. ft.
3
CD05 PTO available and has same output shaft speed as the CD10. 07 ratio through 12 ratio. CD05 is smaller and has "C" (1410) output option only.
7
The torque rating of this PTO is based on the Allison drive gear rating (for single PTO) of 685 lb.ft. continuous rating and is shown on this page. The CS41 and CD40 PTO ratings are found on page 22 with continuous ratings for Fire pump applications to be calculated as shown on page 3. Ratings above the transmission rating are not approved. Refer to the Allison Tech Data Book for more information. The Transmission rating means that PTO CS41-A1007 is rated to 479 lb.ft. intermittent and 429 lb.ft. continuous when used on this series transmission. The CS41-A1010 is rated 332 lb.ft intermittent and continuous. (for 2 PTOs the total torqe rating is 1175 lb.ft. at the transmission gear.)
4
A20, CS10, CS41 PTOs in Fire Pump application are approved to 4,000 RPM PTO output shaft speed.
8
Internal clearance change in 2006. Transmissions built prior to 2006 are limited to PTO ratios "07" and below.
2
A20 has single continuous/intermittent duty torque rating.
9
Connection to Allison "PTO enable" circuit must be made when PTO is engaged. Contact dealer for connection type and location.
5
PTO shown with assembly arrangement with output shaft low and to the rear. The shaft high assembly can be used in chassis with interference with the PTO shown. Direct mount pump applications may have clearance depending on the type of pump used. The shaft high assembly of the PTO may also allow direct mount pump installations. Due to the numerous chassis and engine combinations it is not possible to note all the information here.
1
  • Three remote mount output shafts in both keyed and flange types: Versatility for remote pump drives
  • S.A.E. "B", "BB", and "C"; DIN 5462 direct mount pump options: Fits most popular pumps
  • Rotatable direct mount flanges: Allows pump to be positioned for maximum clearance
  • Patented Muncie drag brake: Prevents shaft rotation in "OFF" mode
  • Standard pressure lubrication: No extra cost
  • Two assembly arrangements: Allows the PTO to be mounted shaft high or low on either side of the transmission
  • Brochure
    CS10/11 Series Spec Brochure
    VIEW / DOWNLOAD
  • Installation Instructions
    INSTALLATION INSTRUCTIONS/OWNERS MANUAL FOR CS10 and CS11
    VIEW / DOWNLOAD
  • Service Parts Manual
    CS10/11 Series Service Parts Manual
    VIEW / DOWNLOAD

The Muncie CS10 and CS11 Series Power Take-Offs are warranted to be free of defects in material or workmanship and to meet Muncie’s standard written specifications at the time of sale. Muncie’s obligation and liability under this warranty is expressly limited to repairing or replacing, at Muncie’s option, within two years after date of original installation any defective part or parts or any product not meeting the specifications.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. MUNCIE MAKES NO WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR ANY PARTICULAR PURPOSE. MUNCIE’S OBLIGATION UNDER THIS WARRANTY SHALL NOT INCLUDE ANY TRANSPORTATION CHARGES OR COSTS OF INSTALLATION OR ANY LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR DELAY. THE REMEDIES SET FORTH HEREIN ARE EXCLUSIVE, AND MUNCIE’S LIABILITY WITH RESPECT TO ANY CONTRACT OR SALE OR ANYTHING DONE IN CONNECTION THEREWITH, WHETHER IN CONTRACT, IN TORT, UNDER ANY WARRANTY, OR OTHERWISE, SHALL NOT, EXCEPT AS EXPRESSLY PROVIDED HEREIN, EXCEED THE PRICE OF THE PRODUCT OR PART ON WHICH SUCH LIABILITY IS BASED.

If requested by Muncie, products or parts for which a warranty claim is made are to be returned transportation prepaid to a Muncie Service Center. Any installation or use not in accordance with catalog or package instructions, other improper use, operation beyond capacity, substitution of parts not approved by Muncie, use with equipment other than the equipment on which the Power Take-Off is first installed, or alteration or repair made to the Power Take-Off other than at a Muncie Service Center, shall void this warranty. No employee or representative of Muncie is authorized to change this warranty in any way or to grant any other warranty.

Prices in this program do not constitute an offer to sell. Suggested prices may change without notice. Please contact Muncie Power Products or your local distributor for current pricing on any items listed as $0.00. All prices are in U.S. dollars.

All information included in the M-Power Spec program is complete and correct to the best of our knowledge. However, we cannot assume any responsibility for errors.

© 2021 Muncie Power Products, Inc. 

© 2025 MUNCIE POWER PRODUCTS, INC.