Pin-Pin Cylinders

Our pin-pin mount cylinders are one of the lightest cylinders on the market, which translates to greater payloads, less oil consumption and faster dumping. The pin-pin mount boasts many key features including a self-bleeding design for easier installation, single head nut with no further adjustments needed and a chrome-plated final stage to extend product life. With its low maintenance requirements, the pin-pin offers many years of top performance without additional expenses.

  • Self-bleeding design for easier installation process
  • No packing or head nuts on each stage. Only one head nut that doesn’t need adjustments
  • Chrome-plated final stage extends the life of the cylinder
  • Solid stops machined into top and bottom of each stage, eliminating stop rings and threaded stops
  • Stages are machined and precision ground inside and out to allow for optimal seal / wiper performance
  • Each cylinder is equipped with bearing supports at both the top and bottom. Longer stages have increased overlap for improved column stability.
  • Tight machining tolerances cause smaller tube clearances that result in increased rigidity
  • One of the lightest cylinders on the market which translates to greater payloads, less oil consumption and faster dumping
  • Low maintenance requirements offer many years of top performance without additional expenses

QUALITY MATERIALS

  • All steel tubing are made from seamless hot rolled steel, this results in higher tensile tubes for increased column strength and stiffness
  • Stages have no welded seems allowing for higher pressure capabilities
  • The quality steel used increases resistance to mechanical stress and increases cylinder life
  • Seals and wipers are made of polyurethane and feature a double lip design assuring optimum performance in all climate conditions (-40°F to 212°F / -40°C to 100°C)
  • Bearing supports are made of DELRIN®, they are compatible with all types of hydraulic oils approved by pump makers and are capable of withstanding high and low pressures
Brochure
  • Pin-Pin Cylinders Brochure
    MP15-04
    VIEW
  • Cylinders Overview Brochure
    MM15-01
    VIEW
Data Sheet
  • SA Pin-Pin Data Sheet Model #8-5-285-A00
    DS12-17
    VIEW
  • SA Pin-Pin Data Sheet Model #5-3-084-A00
    DS12-01
    VIEW
  • SA Pin-Pin Data Sheet Model #5-3-104-A00
    DS12-02
    VIEW
  • SA Pin-Pin Data Sheet Model #6-3-084-A00
    DS13-10
    VIEW
  • SA Pin-Pin Data Sheet Model #6-3-104-A00
    DS12-03
    VIEW
  • SA Pin-Pin Data Sheet Model #6-3-110-A00
    DS13-11
    VIEW
  • SA Pin-Pin Data Sheet Model #6-3-120-A00
    DS12-04
    VIEW
  • SA Pin-Pin Data Sheet Model #6-3-126-A00
    DS12-05
    VIEW
  • SA Pin-Pin Data Sheet Model #6-3-130-A00
    DS12-06
    VIEW
  • SA Pin-Pin Data Sheet Model #6-3-140-A00
    DS12-07
    VIEW
  • SA Pin-Pin Data Sheet Model #7-3-110-A00
    DS13-12
    VIEW
  • SA Pin-Pin Data Sheet Model #7-4-135-A00
    DS12-08
    VIEW
  • SA Pin-Pin Data Sheet Model #7-4-156-A00
    DS12-09
    VIEW
  • SA Pin-Pin Data Sheet Model #7-4-161-A00
    DS12-10
    VIEW
  • SA Pin-Pin Data Sheet Model #7-4-167-A00
    DS12-11
    VIEW
  • SA Pin-Pin Data Sheet Model #8-5-169-A00
    DS13-13
    VIEW
  • SA Pin-Pin Data Sheet Model #8-4-170-A00
    DS14-01
    VIEW
  • SA Pin-Pin Data Sheet Model #8-5-190-A00
    DS12-12
    VIEW
  • SA Pin-Pin Data Sheet Model #8-5-220-A00
    DS12-13
    VIEW
  • SA Pin-Pin Data Sheet Model #8-5-235-A00
    DS12-14
    VIEW
  • SA Pin-Pin Data Sheet Model #8-5-250-A00
    DS12-15
    VIEW
  • SA Pin-Pin Data Sheet Model #8-5-265-A00
    DS12-16
    VIEW
  • SA PIN-PIN DATA SHEET MODEL #9-5-220-A01
    DS15-01
    VIEW
  • SA Pin-Pin Data Sheet Model #7-4-135-A01
    DS12-18
    VIEW
  • SA Pin-Pin Data Sheet Model #7-4-135-A06
    DS12-19
    VIEW
  • SA Pin-Pin Data Sheet Model #7-4-156-A01
    DS12-20
    VIEW
  • SA Pin-Pin Data Sheet Model #7-4-156-A06
    DS12-21
    VIEW
  • SA Pin-Pin Data Sheet Model #7-4-167-A01
    DS12-22
    VIEW
  • SA Pin-Pin Data Sheet Model #7-4-167-A02
    DS12-23
    VIEW
  • SA Pin-Pin Data Sheet Model #7-4-167-A06
    DS12-24
    VIEW
  • SA Pin-Pin Data Sheet Model #8-5-190-A06
    DS12-25
    VIEW
  • SA Pin-Pin Data Sheet Model #8-5-220-A06
    DS12-26
    VIEW
  • SA Pin-Pin Data Sheet Model #8-5-235-A06
    DS12-27
    VIEW
  • SA Pin-Pin Data Sheet Model #8-5-250-A06
    DS12-28
    VIEW
  • SA Pin-Pin Data Sheet Model #8-5-265-A06
    DS12-29
    VIEW
  • SA Pin-Pin Data Sheet Model #7-4-180-A00
    DS12-30
    VIEW
  • SA Pin-Pin Data Sheet Model #7-4-180-A06
    DS12-31
    VIEW
  • SA Pin-Pin Data Sheet Model #8-4-170-A06
    DS14-07
    VIEW
Installation Instructions
  • Telescopic Cylinder Disassembly & Reassembly Instructions
    IN13-11
    VIEW
Troubleshooting Guide
  • Cylinder Safety Information Multilingual - Pin-Pin
    IN14-01
    VIEW
CYLINDER MEASUREMENTS (Data Sheets Available Under Literature)
Model No. Stroke (in) Fill/Extend (Gal) Cylinder Weight (lbs) Max Thrust @ 2000 psi (lbf)
5-3-084-A00 85.91 0.52  /4.40 179 32,806
5-3-104-A00 103.23 0.62 / 5.26 220 32,806
6-3-084-A00 84.02 0.60 / 6.72 189 44,290
6-3-104-A00 102.28 0.72 / 7.35 255 44,290
6-3-110-A00 109.61 0.76 / 8.69 278 44,290
6-3-120-A00 118.35 0.82 / 8.55 280 44,290
6-3-126-A00² 126.02 0.88 / 9.24 300 44,290
6-3-130-A00 128.46 0.88 / 9.24 300 44,290
6-3-140-A00³ 140.00 0.92 / 9.74 320 44,290
7-3-110-A00 109.69 0.88 / 11.50 303 57,685
7-4-135-A00 135.67 1.04 / 11.49 330 57,685
7-4-156-A00 157.68 1.19 / 13.43 365 57,685
7-4-161-A00 162.99 1.24 / 14.14 374 57,685
7-4-167-A004 167.01 1.29 / 14.66 385 57,685
8-4-170-A00 168.98 1.42 / 19.15 467 73,706
8-5-169-A00 168.94 1.37 / 18.24 425 73,706
8-5-190-A00 188.98 1.53 / 18.70 464 73,706
8-5-220-A00 219.92 1.75 / 21.74 531 73,706
8-5-235-A00 235.00 1.89 / 23.34 584 73,706
8-5-250-A00 246.89 1.95 / 24.53 588 73,706
8-5-265-A00 265.83 2.09 / 26.53 620 73,706
8-5-285-A00 285.98 2.28 / 29.55 690 73,706
9-5-220-A01 221.00 -- / 37.1 671 119,440
Notes:
1. All cylinders MAX Pressure: 2750 psi due to NPT ports (Rated for 2,900 psi)
2. 6-3-126-A00 cylinders with serial numbers starting with "12 or "13 will have a stroke of 128.46".
3. 6-3-140-A00 cylinders with serial numbers starting with "12 or "13 will have a stroke of 135.47" and closed length of 59.65"
4. 7-4-167-A00 cylinders with serial numbers starting with "12 or "13 will have a stroke of 171.42".

Muncie’s single acting telescopic cylinder is warranted against any defect in material and workmanship which existed at the time of sale by Muncie Power Products, Inc., according to the following provisions, subject to the requirements that the cylinder must be used only in accordance with catalog and package instructions.

The cylinder is warranted for a period of two years from the date of installation. If during the warranty period the cylinder fails to operate to Muncie’s specifications due to a defect in any part, material or workmanship that existed at the time of sale by Muncie, the defective part will be repaired or replaced, at Muncie’s election, at no charge, if the defective part is returned to Muncie with transportation prepaid.

WARNING: The above warranty shall terminate if any alterations or repairs are made to the cylinder other than at a service center owned by Muncie, or if the cylinder is used on any equipment other than the equipment upon which it is first installed.

THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER OBLIGATIONS AND LIABILITIES, INCLUDING NEGLIGENCE AND ALL WARRANTIES OF MERCHANTABILITY AND SUITABILITY, EXPRESSED OR IMPLIED, AND STATE MUNCIE’S ENTIRE AND EXCLUSIVE LIABILITY AND THE BUYER’S EXCLUSIVE REMEDY FOR ANY CLAIM OF DAMAGES IN CONNECTION WITH THE SALE, REPAIR OR REPLACEMENT OF THE ABOVE GOODS, THEIR DESIGN, INSTALLATION OR OPERATION. MUNCIE WILL IN NO EVENT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER, AND OUR LIABILITY WILL UNDER NO CIRCUMSTANCES EXCEED THE CONTRACT PRICE FOR THE GOODS FOR WHICH LIABILITY IS CLAIMED.