PTO BUILD COMPLETE

TG Series Power Take-Off

Model Number

TG6SU6004A3KX

Build ID

Use this unique build ID when referencing your order

04276976490853

List Price

$1261.98

Build Breakdown

Manufacturer: ALLISON

Model: MT-643 (Serial #122765 & higher)


Bolt Type: SAE 6-BOLT OPENING

Rotation: CRNK

PTO %: 96%

Torque: 285 lbs.ft.

HP: 54 HP

PTO Series: TG SERIES

Transmission Gear: U60

Gear Ratio: 04

Shift Type: A - Manual Air Shift, 12 Volt Systems

Assembly Arrangement: 3

Output Type: K - SAE "B" 2 or 4 Bolt, 7/8" 13 Spline

Special Feature: X - None


POWER TAKE OFF
  • TG6SU6004A3KX
    PTO Part Number
    $1261.98
  • TOTAL
    $2457.68
FOOTNOTES
MODEL FOOTNOTES
ADAPTER FOOTNOTES
PTO FOOTNOTES
Allison Transmission Div. of General Motors has a PTO installation checklist available for this transmission. Refer to their Sales Tech Data Book which is available from an authorized service center.
5
If electric/hydraulic (H) shift option is chosen for the Clutch Shift PTO then 131-2-0001 installation kit is required for installation.
2
U60 input gear can be replaced by S68 input gear to obtain output speed 92% of speed shown. Add spacer 23M60200S and stud kit 20MK6603.
7
Interference to the end cover of the CS can be minimized by use of the CS6G housing option. This option is only available with the "B", or "K" output shaft option.
8
TG Series Input Gear: #03T34285 -- Refer to kit program on page 10 & 11 Requires 13M13541 gasket included.
4
The SPD-1001A speed control is available for use with the Clutch Shift PTO's only. It is recommended for PTO and equipment protection from overspeeding.
3
PTO interferes with frame rail on Ford with FD series Diesel Engine. Check Ford Service Bulletin 94-16.
6
Part 43M78970 street tee required for pressure lubrication on Clutch Shift PTO's. This part must be ordered separately. Pressure lubrication is not required on TG Series PTO's but is available as an option upon request if needed to meet specifications.
1
PTO speeds shown are with transmission torque converter in lock-up. Consult Muncie for low engine speed and/or high torque applications. PTO's shown are with the output shaft above center for improved clearance on majority of installations.
9
When using optional adapter, change PTO to "1" assembly.
10
  • Die-cast aluminum housing: Reduces weight and noise, with superior heat dissipation
  • 6 or 8-bolt housing: For simplified installation
  • Modular design: Provides flexibility and ease of repair
  • Constant mesh input gear: Isolates transmission from engagement errors
  • Compact size: Minimizes mounting interference
  • Electric/hydraulic shift option: Eliminates the need for shift cables
  • Extra large shift cover opening: Allows easy access to check backlash
  • Rotatable hydraulic flanges: Maximizes pump clearance
  • Brochure
    Eaton Endurant / Paccar Flyer - TG Series
  • Brochure
    TG Series Spec Brochure
  • Installation Instructions
    Aisin Supplemental Instruction
  • Installation Instructions
    Eaton Endurant / Paccar PTO Activation - TG Series
  • Installation Instructions
    Eaton Endurant / Paccar PTO Installation - TG Series
  • Installation Instructions
    Installation and Owners Manual for 6 and 8 bolt PTOs
  • Installation Instructions
    TG and 82 Series PTO Activation for Paccar TX1 / Eaton Endurant Transmissions
  • Installation Instructions
    TG Heavy Duty Cable Shift Installation Instructions
  • Installation Instructions
    TG Idler Cap Installation Clearance Supplement
  • Installation Instructions
    TG PTO Installation Instructions on GM Pickup with Allison 1000
  • Installation Instructions
    TG Series Seal and Rebuild Kit Supplement
  • Installation Instructions
    TG Series Supplement for EatonFuller UltraShift RTO**910BDM2 Transmissions
  • Product Bulletin
    TG Lectra Shift and E Hydra Obsolescence
  • Product Bulletin
    TG Series Gear Code Obsolescence
  • Service Parts Manual
    TG and 82 Series Available for Eaton Endurant XD
  • Service Parts Manual
    TG Series PTO Service Parts Manual
  • Service Parts Manual
    TG Shift Cover Gasket
  • Troubleshooting Guide
    TG Series PTO Troubleshooting Guide

The Muncie Power Take-Off is warranted to be free of defects in material or workmanship and to meet Muncie’s standard written specifications at the time of sale. Muncie’s obligation and liability under this warranty is expressly limited to repairing or replacing, at Muncie’s option, within one year after date of original installation any defective part or parts or any product not meeting the specifications.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. MUNCIE MAKES NO WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR ANY PARTICULAR PURPOSE. MUNCIE’S OBLIGATION UNDER THIS WARRANTY SHALL NOT INCLUDE ANY TRANSPORTATION CHARGES OR COSTS OF INSTALLATION OR ANY LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR DELAY. THE REMEDIES SET FORTH HEREIN ARE EXCLUSIVE, AND MUNCIE’S LIABILITY WITH RESPECT TO ANY CONTRACT OR SALE OR ANYTHING DONE IN CONNECTION THEREWITH, WHETHER IN CONTRACT, IN TORT, UNDER ANY WARRANTY, OR OTHERWISE, SHALL NOT, EXCEPT AS EXPRESSLY PROVIDED HEREIN, EXCEED THE PRICE OF THE PRODUCT OR PART ON WHICH SUCH LIABILITY IS BASED.

If requested by Muncie, products or parts for which a warranty claim is made are to be returned transportation prepaid to a Muncie Service Center. Any installation or use not in accordance with catalog or package instructions, other improper use, operation beyond capacity, substitution of parts not approved by Muncie, use with equipment other than the equipment on which the Power Take-Off is first installed, or alteration or repair made to the Power Take-Off other than at a Muncie Service Center, shall void this warranty. No employee or representative of Muncie is authorized to change this warranty in any way or to grant any other warranty.

Prices in this program do not constitute an offer to sell. Suggested prices may change without notice. Please contact Muncie Power Products or your local distributor for current pricing on any items listed as $0.00. All prices are in U.S. dollars.

All information included in the M-Power Spec program is complete and correct to the best of our knowledge. However, we cannot assume any responsibility for errors.

© 2021 Muncie Power Products, Inc.