PTO BUILD COMPLETE

CS6 and CS8 Series Power Take-Off

Model Number

CS6BA6704S1BP

Build ID

Use this unique build ID when referencing your order

78964356817102

List Price

$3194.44

Build Breakdown

Manufacturer: ALLISON

Model: 1000 Series (EVS, RDS, SPS, MHS, BUS, TRV)


Bolt Type: SAE 6-BOLT OPENING

Rotation: CRNK

PTO %: 107%

Torque: 250 lbs.ft.

HP: 48 HP

PTO Series: CS6/CS8 Series

Transmission Gear: A67

Gear Ratio: 04

Shift Type: S - Integral Solenoid Electric/Hydraulic, 12V

Assembly Arrangement: 1

Output Type: B - 1 1/4" RD. 5/16" Key

Special Feature: P - Pressure Lube


POWER TAKE OFF
  • CS6BA6704S1BP
    PTO Part Number
    $3194.44
  • TOTAL
    $3194.44
FOOTNOTES
MODEL FOOTNOTES
ADAPTER FOOTNOTES
PTO FOOTNOTES
TG Series Input Gear #03T38783 - use 23M60270 spacer and 20MKM604 stud kit for Installation (included). Refer to kit program on page 10 & 11. The TG Series requires a special non-standard shift cover. Use Code "Z" for Cable Shift, Code "4" for Air Shift, Code "5" for Elec/Air Shift, code "6" for Lectra Shift option. Code "9" for Elec/Hyd shift. Pressure lubrication is not required on the TG Series PTO.
4
"S" shift option includes built-in solenoid valve and required fittings and hose kit on CS6B only.
6
The Muncie SPD-1001D series speed control is available for use with the Clutch Shift Series PTOs only. It is recommended for PTO and equipment protection from overspeeding. Refer to Allison Tech Data Book for overspeed protection and PTO enable options provided by the Allison T.C.M.
7
The CS 07 ratio PTO requires the use of a spacer 23M60270 (requiring normal shim procedures) and stud kit 20TK4360 included with PTO.
9
Pressure lubrication tee fittings are ordered separately for 1000, 2000, 2400 series Transmission P.N. 43TK5157 for pressure lubrication on Clutch Shift PTOs. As an option, remove factory elbow and drill, tap and clean for lube connection. Pressure lubrication is not required on the TG Series PTO.
5
The TG Series PTO requires that the transmission drive gear be stopped during the engage or disengage of the PTO. Refer to PTO operator's manual for proper shifting instructions. Optional Allison package for synchronized PTO drive interface, for TG series with "6" shift option.
8
Allison Transmission has redesigned the transmission nameplates for all 1000/2000 and 3000/4000 Product Family transmissions. The new nameplate designs contain only the information essential to the identification of the transmission. The transmission product family is identified by the first two digits of the transmission serial number: Body Builders can find out information on the transmission by using the Allison Extranet to look up the serial number. For access to this service contact Allison.
14
Interference to the end cover of the CS can be minimized by use of the CS6G housing option. This option is only available with the "B", or "K" output shaft option.
10
PTO Torque Ratings shown are derated to the Transmission drive gear limit of 250 lb.ft. (2 PTO Limit is 200 lb.ft. per opening) (Multiply PTO ratings by .80 when 2 PTOs are used.) Allison Transmission Div. of General Motors has a PTO installation checklist available for this transmission and can be found in the Sales Tech Data Book available from an authorized service center.
3
a.-- GM has a special order option required for PTO operation. 2001-2006 RPO "M1F" &"PTO" must be ordered on vehicles 2007 & later RPO "PTO" must be ordered. This option is not available on Crew Cab. b.-- GM Pick Up Chassis are not installable. c.-- C/K 3500 1 ton cab-chassis 2001-2009 with gas engine PTOs are not installable. 2001 and later diesel engine can install CS6B PTOs with PF Series pumps on this opening with RPO "PTO" & RPO "M1F" ordered with vehicle. 2007-2014 add wire harness 34T40692 + 34T40877. For 2015 & later using "S" shift option add wire harness 34T43466. d.-- When using the GM C4500-C8500MY2001-2010 order 34TK4504 harness kit for CS6, for "S" shift use 34TK5172 or 34TK4505 harness kit for TG6 for the GM supplied PTO option. e-- On C4500 and C5500 Series Top Kick or Kodiak chassis the PTO interferes with exhaust. f-- On C6500 thru C8500 chassis MY2001-2010 the PTO is installable. g-- Pressure lubrication on CS series use 43TK5157 or GM 3500 43TK4497, sold separately.
2
Isuzu, Nissan, and Mitsubishi use shaft high "3" arrangement and direct mount pump only. For chassis prior to 2007, use left side opening for 2007 & later chassis.
12
PTO speeds shown are with transmission torque converter in lock-up. To obtain Lock-Up the PTO must be installed with a connection to the Allison "PTO Enable" circuit and the converter turbine speed must be above 1100 RPM. Typically the best method is shown in the vehicle's "Body Builder's" information.
1
International 4300 series use shaft high "3" arrangement for this side.
11
40TA6855-1 can be used with CS6S Series PTO only. Use standard stud kit (20TK4418) with this PTO. Check for clearance to frame rail and attached components. Exhaust needs to be rerouted on General Motors chassis. Spacer 23M60165S (included) mounts to transmission side.
13
  • Six transmission input gears: Fits most popular automatic and manual transmissions
  • Three remote mount output shafts in keyed and flange types: Versatility for remote pump drives
  • S.A.E. "A", "B", and "BB"; DIN 5462 direct mount pump options: Fits most popular pumps
  • Rotatable direct mount flanges: Allows pump to be positioned for maximum clearance
  • Patented Muncie drag brake: Prevents shaft rotation in "OFF" mode
  • Optional pulse generator: Lets System Protection Device monitor PTO shaft speed
  • Brochure
    CS6 and CS8 Series Spec Brochure
  • Brochure
    Hino PTO Wiring Harness
  • Installation Instructions
    Aisin Supplemental Instruction
  • Installation Instructions
    CS6 - “S” & “R” Activation Kit Installation Supplement to IN84-03
  • Installation Instructions
    CS6 and CS8 Series Supplement for EatonFuller UltraShift RTO**910BDM2 Transmissions
  • Installation Instructions
    CS6 and SH6 Series Stud Kit Installation
  • Installation Instructions
    CS6B and FA6B for 2013-2024 Ram 6.4L Gas Engine Installation Instructions
  • Installation Instructions
    Electric over Hydraulic Supplemental Instructions for CS PTO
  • Installation Instructions
    Hino PTO Interface 2021and Later for CS6
  • Installation Instructions
    Hino PTO Wiring Installation for Allison 2500
  • Installation Instructions
    Installation and Owners Manual for 6 and 8 bolt PTOs
  • Product Bulletin
    CS6 and CS8 Seal Replacement
  • Product Bulletin
    CS6 and CS8 Series Gear Code Obsolescence
  • Product Bulletin
    CS6B-I84 Installation Kits on RAM Applications
  • Product Bulletin
    Pressure Switch Deviation
  • Service Parts Manual
    CS6 and CS8 Output Shaft Sub Assemblies
  • Service Parts Manual
    CS6 and CS8 Service Parts Manual

The Muncie Power Take-Off is warranted to be free of defects in material or workmanship and to meet Muncie’s standard written specifications at the time of sale. Muncie’s obligation and liability under this warranty is expressly limited to repairing or replacing, at Muncie’s option, within one year after date of original installation any defective part or parts or any product not meeting the specifications.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. MUNCIE MAKES NO WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR ANY PARTICULAR PURPOSE. MUNCIE’S OBLIGATION UNDER THIS WARRANTY SHALL NOT INCLUDE ANY TRANSPORTATION CHARGES OR COSTS OF INSTALLATION OR ANY LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR DELAY. THE REMEDIES SET FORTH HEREIN ARE EXCLUSIVE, AND MUNCIE’S LIABILITY WITH RESPECT TO ANY CONTRACT OR SALE OR ANYTHING DONE IN CONNECTION THEREWITH, WHETHER IN CONTRACT, IN TORT, UNDER ANY WARRANTY, OR OTHERWISE, SHALL NOT, EXCEPT AS EXPRESSLY PROVIDED HEREIN, EXCEED THE PRICE OF THE PRODUCT OR PART ON WHICH SUCH LIABILITY IS BASED.

If requested by Muncie, products or parts for which a warranty claim is made are to be returned transportation prepaid to a Muncie Service Center. Any installation or use not in accordance with catalog or package instructions, other improper use, operation beyond capacity, substitution of parts not approved by Muncie, use with equipment other than the equipment on which the Power Take-Off is first installed, or alteration or repair made to the Power Take-Off other than at a Muncie Service Center, shall void this warranty. No employee or representative of Muncie is authorized to change this warranty in any way or to grant any other warranty.

Prices in this program do not constitute an offer to sell. Suggested prices may change without notice. Please contact Muncie Power Products or your local distributor for current pricing on any items listed as $0.00. All prices are in U.S. dollars.

All information included in the M-Power Spec program is complete and correct to the best of our knowledge. However, we cannot assume any responsibility for errors.

© 2021 Muncie Power Products, Inc.