PUMP + PTO PAIRING
ENTER PUMP REQUIREMENTS
SEARCH AVAILABLE PUMPS
POWER TAKE OFF
  • CS6DS6812A1KA
    PTO Part Number
    $0.00
PTO PARTS
  • 23M60200S
    PTO Spacer Required Part
    $96.64
  • 20TK4433
    PTO Stud Kit Required Part
    $54.08
  • TOTAL
    $150.72
FOOTNOTES
MODEL FOOTNOTES
ADAPTER FOOTNOTES
PTO FOOTNOTES
RL Series with combined reduction gear box. ("03" RATIO)
5
TG Series Input Gear: #03T34284 -- Refer to kit program on pages 10 & 11.
1
Direct mount pumps will not clear bulge on right side unless adapter is used. However, there is pump clearance for direct mounting the PKS-Series pump to a TG6S-U**-C1SX for pumps up to the PKS15-2BPBB. The 17 GPM requires a S68 gear (03T94243), 23M60200S and 20MK6603.
3
Some chassis may interfere with indicator switch on air shift PTO's. Order TG-RPS separately.
11
AS2 or AS3 Auto Shift transmissions need to be connected to PTO through the TCM per Eaton instructions.
13
U68 input gear can be replaced by S68 input gear to obtain output speed 92% of speed shown. Add spacer 23M60200S and stud kit 20MK6603 (20TK4433 for Sh or CS).
8
TG Series Input Gear: #03T94243.
2
Do not use for continuous duty applications.
9
For vehicles with spring hanger interference use the 40TU6855-1 adapter. Not applicable for direct mount pumps. Refer to adapter gear assemblies in the table of contents for additional space requirements.
4
18 ratio TG interferes with adjacent transmission gear.
6
The (AMT) is a combination CEEMAT automatic & 18 speed transmission. Refer to the Footnotes #1, 5 & 8 on FULL 36 for additional information when specifing PTOs on the right side opening.
12
PTO torque rating shown is maximum calculated PTO rating which will not exceed the 500 lb. ft. rating set by Eaton for their transmissions with roller bearings. Refer to Eaton bulletin TMIB-0127. Maximum PTO torque must not exceed this rating or the PTO rating shown on page 22 of the general information section.
10
40TU6855-1, Typical adapter used to clear frame interference. 40TU6845-1 & 40TU6830-1 are also available options. Chassis with clutch slave cylinder located at bottom of transmission, the 40TU6830-1 is recommended.
7
  • Six transmission input gears: Fits most popular automatic and manual transmissions
  • Three remote mount output shafts in keyed and flange types: Versatility for remote pump drives
  • S.A.E. "A", "B", and "BB"; DIN 5462 direct mount pump options: Fits most popular pumps
  • Rotatable direct mount flanges: Allows pump to be positioned for maximum clearance
  • Patented Muncie drag brake: Prevents shaft rotation in "OFF" mode
  • Optional pulse generator: Lets System Protection Device monitor PTO shaft speed
  • Brochure
    CS6 and CS8 Series Spec Brochure
  • Brochure
    Hino PTO Wiring Harness
  • Installation Instructions
    Aisin Supplemental Instruction
  • Installation Instructions
    CS6 - “S” & “R” Activation Kit Installation Supplement to IN84-03
  • Installation Instructions
    CS6 and CS8 Series Supplement for EatonFuller UltraShift RTO**910BDM2 Transmissions
  • Installation Instructions
    CS6 and SH6 Series Stud Kit Installation
  • Installation Instructions
    CS6B and FA6B for 2013-2024 Ram 6.4L Gas Engine Installation Instructions
  • Installation Instructions
    Electric over Hydraulic Supplemental Instructions for CS PTO
  • Installation Instructions
    Hino PTO Interface 2021and Later for CS6
  • Installation Instructions
    Hino PTO Wiring Installation for Allison 2500
  • Installation Instructions
    Installation and Owners Manual for 6 and 8 bolt PTOs
  • Product Bulletin
    CS6 and CS8 Seal Replacement
  • Product Bulletin
    CS6 and CS8 Series Gear Code Obsolescence
  • Product Bulletin
    CS6B-I84 Installation Kits on RAM Applications
  • Product Bulletin
    Pressure Switch Deviation
  • Service Parts Manual
    CS6 and CS8 Output Shaft Sub Assemblies
  • Service Parts Manual
    CS6 and CS8 Service Parts Manual

The Muncie Power Take-Off is warranted to be free of defects in material or workmanship and to meet Muncie’s standard written specifications at the time of sale. Muncie’s obligation and liability under this warranty is expressly limited to repairing or replacing, at Muncie’s option, within one year after date of original installation any defective part or parts or any product not meeting the specifications.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. MUNCIE MAKES NO WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR ANY PARTICULAR PURPOSE. MUNCIE’S OBLIGATION UNDER THIS WARRANTY SHALL NOT INCLUDE ANY TRANSPORTATION CHARGES OR COSTS OF INSTALLATION OR ANY LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR DELAY. THE REMEDIES SET FORTH HEREIN ARE EXCLUSIVE, AND MUNCIE’S LIABILITY WITH RESPECT TO ANY CONTRACT OR SALE OR ANYTHING DONE IN CONNECTION THEREWITH, WHETHER IN CONTRACT, IN TORT, UNDER ANY WARRANTY, OR OTHERWISE, SHALL NOT, EXCEPT AS EXPRESSLY PROVIDED HEREIN, EXCEED THE PRICE OF THE PRODUCT OR PART ON WHICH SUCH LIABILITY IS BASED.

If requested by Muncie, products or parts for which a warranty claim is made are to be returned transportation prepaid to a Muncie Service Center. Any installation or use not in accordance with catalog or package instructions, other improper use, operation beyond capacity, substitution of parts not approved by Muncie, use with equipment other than the equipment on which the Power Take-Off is first installed, or alteration or repair made to the Power Take-Off other than at a Muncie Service Center, shall void this warranty. No employee or representative of Muncie is authorized to change this warranty in any way or to grant any other warranty.

Prices in this program do not constitute an offer to sell. Suggested prices may change without notice. Please contact Muncie Power Products or your local distributor for current pricing on any items listed as $0.00. All prices are in U.S. dollars.

All information included in the M-Power Spec program is complete and correct to the best of our knowledge. However, we cannot assume any responsibility for errors.

© 2021 Muncie Power Products, Inc.