PTO BUILD COMPLETE

82 Series Power Take-Off

Model Number

828SU6805T1IX

Build ID

Use this unique build ID when referencing your order

99765432203461

List Price

CONTACT CUSTOMER SERVICE FOR PRICING

Build Breakdown

Manufacturer: EATON/FULLER

Model: RTLO-18913A (T2)


Bolt Type: SAE 8-BOLT OPENING

Rotation:

PTO %: %

Torque: lbs.ft.

HP: HP

PTO Series: 82 Series

Transmission Gear: U68

Gear Ratio: 05

Shift Type: -

Assembly Arrangement: 1

Output Type: -

Special Feature: -


POWER TAKE OFF
  • 828SU6805T1IX
    PTO Part Number
    $0.00
  • TOTAL
    $0.00
FOOTNOTES
MODEL FOOTNOTES
ADAPTER FOOTNOTES
PTO FOOTNOTES
TG Series Input Gear: #03T34284 -- Refer to kit program on pages 10 & 11.
1
Optional: U68 input gear can be replaced by S68 input gear to obtain output speed 92% of speed shown. Add spacer 23M80190 and stud kit 20MK8808.
7
RL Series with combined reduction gear box. ("03" RATIO)
5
Do not use for continuous duty applications.
8
TG Series Input Gear: #03T94243.
2
Transmissions with clutch assist cylinders interfere with "3" arrangement PTO.
12
AS2 or AS3 Auto Shift transmissions need to be connected to PTO through the TCM per Eaton instructions.
11
Vehicles with set-back front axles and direct mount pumps may find better clearance with a "3" assembly PTO. Also, clearance of air tanks is improved on International chassis.
3
PTO torque rating shown is maximum calculated PTO rating which will not exceed the 500 lb. ft. rating set by Eaton for their transmissions with roller bearings. Refer to Eaton bulletin TMIB-0127. Maximum PTO torque must not exceed this rating or the PTO rating shown on page 22 of the general information section.
9
18 ratio TG ans CS 14 ratio interfere with adjacent gear.
6
The (AMT) is a combination CEEMAT automatic & 18 speed transmission. Refer to the Footnotes #1, 4, 6, 8, 10 and 11 on Appl. 36 bottom opening when specifying PTOs.
10
Direct Mount Dump Pump installation is best with "1" arrangement PTO. Proper support bracket is required from rear of pump to transmission.
13
40TU6886-1 + 23M80500 + 12M80062 +20MK8817. When using the 40TU6886-1 adapter to change rotation -- change TG Series, CS Series, SH Series, and RL Series to 6-bolt PTO housing (TG6S, CS6S, SH6S, and RL6D respectively). Add 23M60200S + 20MK6603 for RL Series on PTO side of adapter.
4
  • Up to 500 lbs.ft. torque capacity and 95 H.P. at 1,000 RPM: Power to drive high-volume pumps, high CFM blowers
  • Double-acting air shift: Positive engagement and disengagement
  • Two companion flange output types: Versatility for remote pump and mechanical drives
  • Seven direct mount pump options: S.A.E. "B," "BB," "C," "D;" and DIN 5462 mounts
  • Rotatable direct mount flanges: Allows pump to be positioned for maximum clearance
  • Weight: 85 lbs.
  • Housing construction: Cast iron
  • Speed ratios: 8
  • Output shaft options: 9
  • Rotatable pump flange: Standard
  • Assembly arrangements: 2
  • Brochure
    82 Series Spec Brochure
  • Brochure
    Eaton Endurant / Paccar Flyer - 82 Series
  • Installation Instructions
    82 Series AirShift Cylinder Installation
  • Installation Instructions
    82 Series Double Acting Air Shift Installation
  • Installation Instructions
    82 Series Double Acting ElectricAir Shift System Option V
  • Installation Instructions
    82 Series Orifice Kit
  • Installation Instructions
    82 Series Supplement for EatonFuller UltraShift RTO**910BDM2 Transmissions
  • Installation Instructions
    Eaton Endurant / Paccar PTO Activation - 82 Series
  • Installation Instructions
    Installation and Owners Manual for 6 and 8 bolt PTOs
  • Installation Instructions
    TG and 82 Series PTO Activation for Paccar TX1 / Eaton Endurant Transmissions
  • Product Bulletin
    82 Series Air Shift Kit
  • Product Bulletin
    82 Series Air Shift Update
  • Product Bulletin
    82 Series for Eaton Endurant Now Available
  • Product Bulletin
    82 Series Gear Code Obsolescence
  • Service Parts Manual
    82 Series PTO Parts List and Service Manual (Built After Nov 2017)
  • Service Parts Manual
    82 SERIES PTO PARTS LIST AND SERVICE MANUAL (BUILT BEFORE NOV 2017)
  • Service Parts Manual
    TG and 82 Series Available for Eaton Endurant XD

The Muncie Power Take-Off is warranted to be free of defects in material or workmanship and to meet Muncie’s standard written specifications at the time of sale. Muncie’s obligation and liability under this warranty is expressly limited to repairing or replacing, at Muncie’s option, within one year after date of original installation any defective part or parts or any product not meeting the specifications.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. MUNCIE MAKES NO WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR ANY PARTICULAR PURPOSE. MUNCIE’S OBLIGATION UNDER THIS WARRANTY SHALL NOT INCLUDE ANY TRANSPORTATION CHARGES OR COSTS OF INSTALLATION OR ANY LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR DELAY. THE REMEDIES SET FORTH HEREIN ARE EXCLUSIVE, AND MUNCIE’S LIABILITY WITH RESPECT TO ANY CONTRACT OR SALE OR ANYTHING DONE IN CONNECTION THEREWITH, WHETHER IN CONTRACT, IN TORT, UNDER ANY WARRANTY, OR OTHERWISE, SHALL NOT, EXCEPT AS EXPRESSLY PROVIDED HEREIN, EXCEED THE PRICE OF THE PRODUCT OR PART ON WHICH SUCH LIABILITY IS BASED.

If requested by Muncie, products or parts for which a warranty claim is made are to be returned transportation prepaid to a Muncie Service Center. Any installation or use not in accordance with catalog or package instructions, other improper use, operation beyond capacity, substitution of parts not approved by Muncie, use with equipment other than the equipment on which the Power Take-Off is first installed, or alteration or repair made to the Power Take-Off other than at a Muncie Service Center, shall void this warranty. No employee or representative of Muncie is authorized to change this warranty in any way or to grant any other warranty.

Prices in this program do not constitute an offer to sell. Suggested prices may change without notice. Please contact Muncie Power Products or your local distributor for current pricing on any items listed as $0.00. All prices are in U.S. dollars.

All information included in the M-Power Spec program is complete and correct to the best of our knowledge. However, we cannot assume any responsibility for errors.

© 2021 Muncie Power Products, Inc.