Fire & Rescue

  • 82 Series Power Take-Off

    Built for high-torque and heavy-duty requirements, the 82 Series PTO features a lever or air shift cast iron housing and a single or dual optional hydraulic pump mount.

    Max Torque

    500 lbs.ft.

    Max HP (@1000 RPM)

    95 HP

    Weight

    85 lbs.

  • Cable Controls

    Muncie Power Products has the ability to provide a wide variety of cable controls.

  • CS10/CS11 Series Power Take-Off

    Constructed with large gears, the CS10 Series PTO is built for heavy duty applications. The CS10 features a drag brake and an output shaft designed around popular hydraulic pumps. For a more compact installation, the CS11 is a remotely mounted solenoid option.

    Max Torque

    500 lbs.ft.

    Max HP (@1000 RPM)

    95 HP

    Weight

    68 lbs.

  • CS24/CS25 Series Power Take-Off

    Designed with the same technology as the CS10 Series, the CS24 Series PTO is 20 percent smaller. CS PTOs are engaged by means of a direct mounted solenoid, which activates an internal wet clutch pack. With this feature, installation is made simple with a single hose connection

    Max Torque

    325 lbs.ft.

    Max HP (@1000 RPM)

    62 HP

    Weight

    52 lbs.

  • CS40/CS41 Series Power Take-Off

    When you need the max power from an Allison 3000 or 4000 and Caterpillar CX transmission, the CS40/41 Series power take-off delivers. Constructed with the widest gears possible, the CS40/41 is built for maximum strength, noise reduction, durability and the highest output torque rating available.

    Max Torque

    600 lbs.ft.

    Max HP (@1000 RPM)

    114 HP

    Weight

    69 lbs.

  • CS6/CS8 Series Power Take-Off

    Designed to work on Allison 1000 and 2000 series automatics and many other current manual transmissions, the CS6/8 Series PTOs offer direct mount pump options and a drag brake. Upgrading to a multi-disk clutch brake allows for absolute shaft stoppage.

    Max Torque

    350 lbs.ft.

    Max HP (@1000 RPM)

    67 HP

    Weight

    47 lbs.

  • DC Power Packs

    12 Volt DC Power Packs can be used to provide hydraulic power for light duty applications

  • EX Drive Shaft Extension

    The EX Drive is designed to fit on Allison 3000 and 4000 series transmissions with retarder or cooler, and allows for large gear or piston pumps to be direct mounted, eliminating the need for timely driveline installations. 

  • FR/FA Series Power Take-Off

    The FR and FA Series power take-offs were designed in cooperation with Ford Motor Company's engineers to fit the 5R110 "TorqShift®" and 4R100 automatic transmissions.

    1998-2004 F250-F550 (Gas or Diesel) with 4R100
    2005-2016 F250-F550 (Gas) with 5R110
    2005-2010 F250-F550 (Diesel) with 5R110

  • FR3C Series Power Take-off

    Muncie Power's FR3C power take-off gives you the maximum torque available from the Ford Torqshift transmission with a keyed shaft output.

    2016 (Built after Jan. 6) F650-F750 (Diesel) with 6R140

    Max Torque

    237 lbs.ft.

    Max HP (@1000 RPM)

    45 HP

  • HS24 SERIES Power Take-Off

    A solution for limited clearance applications, the HS24 Series PTO features a sculptured housing designed to clear mounting obstructions and a direct mount solenoid for a clean and simple installation.

    Max Torque

    325 lbs.ft.

    Max HP (@1000 RPM)

    62 HP

    Weight

    52 lbs.

  • PK Series Gear Pump

    The PK Series is designed to meet the application needs of either a pump or a motor with displacements between 4 GPM and 17 GPM at 1000 RPM.

    Displacement (Cu.In./Rev)

    .98 - 3.94

    GPM (@1000 RPM)*

    4.2 - 17.1

    Max Pressure

    3,000 PSI

    *Flow rates are theoretical.

  • PL Series Gear Pump

    The PL Series is designed to meet the application needs of either a pump or a motor with displacements between 14 GPM and 30 GPM at 1000 RPM.

    Displacement (Cu.In./Rev)

    3.18 - 7.01

    GPM (@1000 RPM)*

    13.8 - 30.3

    Max Pressure

    3,000 PSI

    *Flow rates are theoretical.

  • SPD-1001D System Protection Device

    Muncie Power Products, Inc. has introduced a revolutionary safety device for powered truck equipment

  • SS66 Series Split Shaft Power Take-Off

    SS66 Series Split Shaft PTOs are used to provide two 6-bolt PTO apertures

    Max Torque (Thru-shaft)

    2900 lbs.ft.

    Weight

    20 lbs.

  • SS88 Series Split Shaft Power Take-Off

    SS88 Series Split Shaft PTOs are used to provide two 8-bolt PTO apertures for a variety of heavy duty applications and auxiliary power drives.

    Max Torque (Thru-shaft)

    21,000 lbs.ft.

    Weight

    160 lbs.

  • SSH2 & SSV2 Series Power Take-Off

    Split shafts are designed to use the main vehicle driveshaft as their input and provide multiple outputs for auxiliary power equipment.

    Max Torque (Thru-shaft)

    21,600 lbs.ft.

    Weight

    234 lbs. (SSH2) & 255 lbs. (SSV2)

  • V130 Directional Control Valve

    The V130 is constructed with high grade iron castings and nickel-plated spools for use in high pressure applications and can be configured with many different spool, control, and positioner options. The V130 is designed for flow rates up to 55 GPM (208 LPM), and offers superior performance in a compact package. Muncie Power Products takes pride in supplying the highest quality products along with outstanding service & support.

    Flow Capacity (Nominal)

    34 GPM (130 LPM)

    Flow Capacity (Maximum)

    55 GPM (208 LPM)

    Max Pressure (1-3 Sections)

    5,440 PSI (375 BAR)

    Max Pressure (4-6 Sections)

    5,075 PSI (350 BAR)

    Max Pressure (7-10 Sections)

    4,710 PSI (325 BAR)