Snow & Ice

  • 17 Series Directional Control Valves

    Muncie 17 Series directional control valves are well suited for a wide variety of hydraulic applications where flow rates are low.

    Flow Capacity (Nominal)

    12 GPM (45 LPM)

    Flow Capacity (Maximum)

    18 GPM (68 LPM)

    Max Pressure

    3,500 PSI (242 BAR)

  • Advantage Systems

    The Advantage System is a mid-level technology solution for snow and ice control. The controls are intuitive and extremely easy to operate. The system utilizes a unique communication protocol, which only requires power and ground to communicate between the controls and hydraulics. This two-wire communication system reduces the amount of conductors that are routed between the controls and the hydraulic enclosure.

  • Advantage+

    The Advantage+ System is a high tech solution for snow and ice control. Through Wi-Fi, users can connect to Muncie Power Products for diagnostic support. Through the connection, engineers can view system parameters, remotely troubleshoot, adjust settings, and keep the truck on the road.

  • Cable Controls

    Muncie Power Products has the ability to provide a wide variety of cable controls.

  • CD05 Series Power Take-Off

    A constant drive power take-off, the CD05 Series PTO is designed to fit tight mount applications. Without loss of torque or horsepower, the CD05 uses the same components as the CD10 but is approximately 15 percent smaller.

    Max Torque

    360 lbs.ft.

    Max HP (@1000 RPM)

    68 HP

    Weight

    39 lbs.

  • Central Hydraulic Systems

    Our preassembled, self-contained central hydraulic systems come standard with a heavy-duty tank enclosure. Also, we incorporate preinstalled directional control valves, in-tank return line filter and optional MESP Series electronic control spreader system.

  • Control Consoles - Air

    Muncie ASC2 Series consoles for work truck applications are both functional and attractive

  • CS10/CS11 Series Power Take-Off

    Constructed with large gears, the CS10 Series PTO is built for heavy duty applications. The CS10 features a drag brake and an output shaft designed around popular hydraulic pumps. For a more compact installation, the CS11 is a remotely mounted solenoid option.

    Max Torque

    500 lbs.ft.

    Max HP (@1000 RPM)

    95 HP

    Weight

    68 lbs.

  • CS24/CS25 Series Power Take-Off

    Designed with the same technology as the CS10 Series, the CS24 Series PTO is 20 percent smaller. CS PTOs are engaged by means of a direct mounted solenoid, which activates an internal wet clutch pack. With this feature, installation is made simple with a single hose connection

    Max Torque

    325 lbs.ft.

    Max HP (@1000 RPM)

    62 HP

    Weight

    52 lbs.

  • CS6/CS8 Series Power Take-Off

    Designed to work on Allison 1000 and 2000 series automatics and many other current manual transmissions, the CS6/8 Series PTOs offer direct mount pump options and a drag brake. Upgrading to a multi-disk clutch brake allows for absolute shaft stoppage.

    Max Torque

    350 lbs.ft.

    Max HP (@1000 RPM)

    67 HP

    Weight

    47 lbs.

  • EX Drive Shaft Extension

    The EX Drive is designed to fit on Allison 3000 and 4000 series transmissions with retarder or cooler, and allows for large gear or piston pumps to be direct mounted, eliminating the need for timely driveline installations. 

  • FR/FA Series Power Take-Off

    The FR and FA Series power take-offs were designed in cooperation with Ford Motor Company's engineers to fit the 5R110 "TorqShift®" and 4R100 automatic transmissions.

    1998-2004 F250-F550 (Gas or Diesel) with 4R100
    2005-2016 F250-F550 (Gas) with 5R110
    2005-2010 F250-F550 (Diesel) with 5R110

  • GA/GM Series Power Take-Off

    The GA/GM series power take-offs are Clutch Shift style PTOs designed in cooperation with GM engineers for the Allison 1000, 2000, 2400 series transmissions.

    Max Torque

    158 lbs.ft.

    Max HP (@1000 RPM)

    30 HP

    Weight

    35 lbs.

  • GB Series Power Take-Off

    The GB Series front mount gearbox offers a variety of options for crankshaft driven power take-offs. Available in a wide range of speed ratios, shift options, and pump mountings, the GB Series gearbox is a versatile unit for front drive applications.

    Max Torque

    220 lbs.ft.

    Max HP (@1000 RPM)

    42 HP

    Weight

    45-72 lbs.

  • HS24 SERIES Power Take-Off

    A solution for limited clearance applications, the HS24 Series PTO features a sculptured housing designed to clear mounting obstructions and a direct mount solenoid for a clean and simple installation.

    Max Torque

    325 lbs.ft.

    Max HP (@1000 RPM)

    62 HP

    Weight

    52 lbs.

  • Hydraulic Oil Filters

    Muncie return line filters provide an effective and economical means of protecting and prolonging the life of any hydraulic system.

  • MESP 3016 / 3017 Electronic Spreader System

    The MESP 3016 / 3017 is an electronic spreader package for snow and ice control vehicles. It is easy to setup and install as well as being perfect for new or retrofit installations. This spreader control system is compatible with all spreader bodies. Group with air, cable, or solenoid shift stack valves to control cylinder functions. 

    Spinner Flow Rate

    0 - 8 GPM

    Auger Flow Rate

    0 - 17 GPM

  • MESP 3020 Electronic Spreader System

    The MESP3020 is an electronic spreader package with integrated hoist functionality for snow and ice control vehicles. This package is a perfect solution when combining a hydraulically driven hoist and spreader with an electrically driven plow. Various options are available to fit nearly any spreader application.

    Spinner Flow Rate

    0 - 8 GPM

    Auger Flow Rate

    0 - 17 GPM

  • MSV Series Selector Valve

    The two position, two way valve provides a simple means of directing oil flow into two separate hydraulic circuits or can be used as a low pressure bypass back to the reservoir.

    Flow Capacity (Nominal)

    60 GPM (227 LPM)

    Max Pressure

    3,500 PSI NPT, 3,000 PSI ODT

  • PF Series Gear Pump

    Ultimate power and performance in a small package best describes the F4 Series gear pumps. The pressure balanced bushing blocks and sleeve bearings provide both long life and high performance.

    Displacement (Cu.In./Rev)

    .24 - 2.01

    GPM (@1000 RPM)*

    1 - 8.7

    Max Pressure

    3,625 PSI

    *Flow rates are theoretical.

  • PH Series Clutch Pumps

    Muncie clutch pumps provide hydraulic power at the flip of a switch. Clutch pumps can be used in situations where a PTO aperture is unavailable or difficult to access. Although normally belt driven, clutch pumps may also be shaft driven from the engine crankshaft.

    Displacement (Cu.In./Rev)

    .62 - 2.96

    GPM (@1000 RPM)*

    2.7 - 12.8

    Max Pressure

    3,500 PSI

    *Flow rates are theoretical.

  • PK Series Gear Pump

    The PK Series is designed to meet the application needs of either a pump or a motor with displacements between 4 GPM and 17 GPM at 1000 RPM.

    Displacement (Cu.In./Rev)

    .98 - 3.94

    GPM (@1000 RPM)*

    4.2 - 17.1

    Max Pressure

    3,000 PSI

    *Flow rates are theoretical.

  • PL Series Gear Pump

    The PL Series is designed to meet the application needs of either a pump or a motor with displacements between 14 GPM and 30 GPM at 1000 RPM.

    Displacement (Cu.In./Rev)

    3.18 - 7.01

    GPM (@1000 RPM)*

    13.8 - 30.3

    Max Pressure

    3,000 PSI

    *Flow rates are theoretical.

  • PTO Shaft Extensions

    Muncie’s PTO shaft extensions for the Allison 3000 and 4000 Series transmission provide easier hydraulic pump installation by moving the hydraulic pump mount to the rear of the transmission. Shaft Extensions are available for most Allison 3000 & 4000 Series transmission applications and popular pump mounts.

    Weight

    42 lbs.

  • PV Series Displacement Piston Pumps

    The Muncie PV Series pumps consist of the PVL, PVJ, and PVE variable displacement piston pumps that are used in closed center hydraulic systems.

    Displacement (Cu.In./Rev)

    1.83 - 8.97

    GPM (@1000 RPM)*

    7.9 - 38.8

    Max Pressure

    4,495 PSI

    *Flow rates are theoretical.

  • V080 Directional Control Valve

    The V080 is constructed with high grade iron castings and nickel-plated spools for use in high pressure applications and can be configured with many different spool, control, and positioner options. The V080 is designed for flow rates up to 30 GPM (114 LPM), and offers superior performance in a compact package. Muncie Power Products takes pride in supplying the highest quality products along with outstanding service & support.

    Flow Capacity (Nominal)

    21 GPM (80 LPM)

    Flow Capacity (Maximum)

    30 GPM (114 LPM)

    Max Pressure (1-3 Sections)

    5,075 PSI (350 BAR)

    Max Pressure (4-6 Sections)

    4,650 PSI (320 BAR)

    Max Pressure (7-10 Sections)

    4,350 PSI (300 BAR)

  • V080 Hybrid System

    This unique circuit design optimizes operations with full flow but also insures cylinders and spreader operations can work together when required. It is all-automatic. Paired with our entry level electronic controls for a customized and budget conscience solution.

  • V130 Directional Control Valve

    The V130 is constructed with high grade iron castings and nickel-plated spools for use in high pressure applications and can be configured with many different spool, control, and positioner options. The V130 is designed for flow rates up to 55 GPM (208 LPM), and offers superior performance in a compact package. Muncie Power Products takes pride in supplying the highest quality products along with outstanding service & support.

    Flow Capacity (Nominal)

    34 GPM (130 LPM)

    Flow Capacity (Maximum)

    55 GPM (208 LPM)

    Max Pressure (1-3 Sections)

    5,440 PSI (375 BAR)

    Max Pressure (4-6 Sections)

    5,075 PSI (350 BAR)

    Max Pressure (7-10 Sections)

    4,710 PSI (325 BAR)